Sanishower Water Pump

The Saniflo Sanishower gray water pump is a small, compact unit designed to remove waste water from a shower, sink, bar sink, or other fixture. It’s ideal for use in basement apartments, out buildings, condominiums, mobile homes, cabins, or anywhere you need gray water removal. It’s small enough to fit under a raised shower base, beside a shower stall, inside a kitchen cabinet, inside a vanity, or behind a wall. Powerful and economical, the Sanishower will pump waste water up to 12 feet high and up to 100 feet away from a soil stack. Internally, it features a micro switch that activates the unit when water enters the pressure chamber. The sealed motor activates a spindle/shaft to drive the impeller, keeping moving parts to a minimum to reduce maintenance. Water is then pumped out into the discharge pipe. With a short normal operating cycle of only 2-10 seconds, the unit’s power consumption is minimal. The Sanishower pump will also accept and discharge waste water from other fixtures such as a shower or urinal. It is recommended that the pump be connected to a Ground Fault Interrupter (GFI) circuit. The Sanishower is certified to American and Canadian Standards: Electrical standard UL 788, CA: Electrical standard CSA C22.2.

• Measures 5-3/4″ H x 11-5/8″ W x 6-3/8″ D
• Power supply: 115V – 60 Hz
• Discharge: vertically up to 12 ft; horizontally up to 100 ft
• Discharge rate: 14 gal/min
• Discharge pipe diameter: 3/4″

Specifications