The Hifonics Zeus 6×9-inch speakers and QPower Enclosures bundle are built for drivers who want real performance without overcomplicating the upgrade.
The 1-inch dome tweeters are built for reliability and tuned to deliver clear, detailed highs. The passive Butterworth crossover manages the transition from midrange to tweeter smoothly, keeping the sound cohesive and natural. Alpha-Cellulose cones are lightweight enough for quick, accurate response and rigid enough to produce deep, controlled bass. A rubber surround is bonded to the cone with high-temperature adhesive, forming a permanent connection that won’t give out under power or prolonged heat. The pure copper voice coil pairs with a Kapton former to generate a strong magnetic field while pulling heat away efficiently. An over-coil cooling system keeps air circulating through the spider during extended use, and the epoxy-infused natural fiber spider stays flexible without losing structural strength.
The QPower enclosures give those speakers the environment they deserve. Built from sturdy 5/8-inch MDF with reinforced glued seams, these vertical boxes reshape the classic angled 6×9 design to create a more direct sound path inside your vehicle. Poly-fiber damper lining handles resonance so bass feels grounded, and mids stay clean. The trunk carpet exterior fits naturally into most interiors, and nickel-plated spring terminals make wiring dependable and straightforward. Every pair arrives prewired with terminal cups, mounting screws, and baffle materials — ready to go.
Together, this bundle of Hifonics Zeus 6×9 Inch Coaxial Speakers and the QPower VT6x9 Vertical Speaker Box Enclosures is a smart, complete starting point for drivers who want real, lasting audio improvement without overcomplicating the process.
- Includes (2) Hifonics Zeus 6 x 9-inch coaxial speakers and (2) QPower enclosure boxes
- 1-inch Neo-Mylar soft dome tweeters resist impact and deliver clear, powerful highs for consistent sound quality
- Kapton former dissipates heat efficiently while keeping the assembly light and responsive
- Alpha-Cellulose cones stay lightweight for quick response and rigid enough for deep bass
- Rubber surround resists moisture, handles mid-bass impact, and holds up in tough conditions
- High-temp adhesive creates a permanent bond between the cone and surround — built to last
- Pure copper voice coil generates a strong magnetic field through a thin, efficient extrusion
- Epoxy-infused natural fiber spider stays flexible where needed and strong where it counts
- Over-coil cooling circulates air through the spider to keep the voice coil running cool
- Passive Butterworth crossover blends midrange into the tweeter smoothly without harsh frequency jumps
- Anti-resonant stamped steel basket stays rigid under pressure
- Ferrite magnet delivers a strong magnetic field in a compact size that fits nearly any install
- Connect via spade connectors or solder directly for a clean, dependable signal
- Designed for factory dash replacement locations, no grills needed
- Power handling: 60W RMS / 400W Peak
- impedance: 4-Ohm
- Frequency response: 46 Hz-20kHz
- Sensitivity: 88 dB
- Crossover slope: 1kHz + 3kHz at 12dB
- Mounting cut-out: 8.64 x 5.98 inches
- Mounting depth: 3.35 inches
- Color: Black
- Outside dimensions (L x W x H): 10.35 x 7.2 inches
- Weight: 6.15 pounds
- Part Number: ZS-693
- Pair of 6 x 9-inch speaker enclosures with a vertical mount that opens up cleaner sound paths inside cars and trucks
- Solid 5/8-inch MDF with reinforced glued seams to reduce vibration and keep your speakers steady
- Poly-fiber damping along the interior helps soften unwanted resonance for clearer, more honest bass and tone
- Covered in trunk carpet that blends into most vehicle interiors while protecting the enclosure
- Nickel-plated spring terminals allow quick, reliable wiring without specialty tools or complicated steps
- Delivered as a matched pair, prewired with terminal cups, baffle material, and mounting screws for a smoother install
- Gives your system more room to breathe, helping your speakers deliver fuller sound without cutting factory panels
- Material: MDF
- Color: Charcoal
- Dimensions (L x W x H): 10 x 9 x 14.13 inches
- Weight: 10 pounds
- Part Number: VT6X9
Questions? We’ve Got Answers.
Helpful answers about product features, setup, and more
What material is the coaxial speakers made of?
The coaxial speakers is constructed from steel. This material choice supports everyday use while maintaining the structural integrity needed for the product’s intended applications.
What are the dimensions of the coaxial speakers?
The coaxial speakers measures 10 x 9 x 14.13 inches (length x width x height). Use these measurements to plan mounting, placement, or transport for your setup.
What is the coaxial speakers used for?
The coaxial speakers is used for live sound, DJ setups, home audio, or event production, depending on configuration. It connects with a typical audio chain — source, mixer or controller, and amplification — to produce sound for the intended environment.
What is the best way to maintain the coaxial speakers?
Wipe with a damp cloth and dry thoroughly to prevent rust. For powder-coated finishes, avoid abrasive cleaners that may scratch the coating. Regular light cleaning extends the lifespan of the coaxial speakers and keeps it looking and performing well over time.
Who makes the coaxial speakers?
The coaxial speakers is made by Hifonics Zeus. Hifonics Zeus produces this item as part of its lineup, and product details such as specifications, included accessories, and warranty terms are set by the brand.
How much does the coaxial speakers weigh?
The coaxial speakers weighs approximately 6.15 pounds. Use this figure to plan transport, rigging, or mounting requirements for your setup.
Reviews
There are no reviews yet.